flashrom v0.9.7-r1711 on Linux 3.14.2-1-ARCH (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. sh: dmidecode: Kommando nicht gefunden. dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel H77". Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on H77 failed. New value is 0x2a. Warning: SPI Configuration Lockdown activated. PROBLEMS, continuing anyway Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Reading old flash chip contents... done. Verifying flash... FAILED at 0x00002000! Expected=0x46, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0x1dd50 [benneti@TiProdigy ~]$ sudo flashrom --programmer internal -f -w '/home/benneti/flashed.rom' flashrom v0.9.7-r1711 on Linux 3.14.2-1-ARCH (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. sh: dmidecode: Kommando nicht gefunden. dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel H77". Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0xdc from 0x2a to 0x0b on H77 failed. New value is 0x2a. Warning: SPI Configuration Lockdown activated. PROBLEMS, continuing anyway Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_block_erase_20 failed during command execution at address 0x180000 Reading current flash chip contents... done. spi_block_erase_52 failed during command execution at address 0x180000 Reading current flash chip contents... done. spi_block_erase_d8 failed during command execution at address 0x180000 Reading current flash chip contents... done. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. spi_chip_erase_c7 failed during command execution FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running.