Dave,
This is good information, and actually answer exactly what I was looking for.
Stefan from the Coreboot project point me to the nvramtool tool. I did test it before I post my question, and I have to agree that the only test I did was the -a switch, and conclude it didn't work. In fact it does work when using the -b option. It create a 256 bytes file, which I assume is similar content.
To validate I ran the following from each command od -Ax -tx1z -v /dev/nvram
and
nvramtool -x
We could see that both have the same 114 bytes pattern produce by /dev/nvram
Thank to all of you, this will save me a lot of time
On Mon, Oct 25, 2010 at 20:41, Dave B flashrom@d10.karoo.co.uk wrote:
On 25/10/10 15:53, Gaetan Lord wrote:
Hi,
Not sure if you can help me on the following, but if I do not ask, I will not get any answer.
I have to check +- 400 identical systems. I could do the hardware section, but the only missing pieces is the BIOS setting.
I try flashrom on the board without success, but I think you could help me.
I wonder if there is a way to dump the BIOS settings from the memory to a file. I want to do a checksum on the file, and compare with a master system. That way I do not need to decode the settings, but I guess the checksum will be different if I have a different configuration.
Do any of you have an idea, or track I could follow to achieve my goal.
This could be a dos, or linux solution.
Thanks in advance for any help
I needed similar and found it on this link: http://www.pixelbeat.org/docs/bios/
Essentially (on Linux): sudo modprobe nvram sudo dd if=/dev/nvram of=dir/nvram-save/2010-10-26
... then md5sum in the same script ?
Dave
flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom