I remembered DediProg Software have "Firmware AutoUpdate" in Help Menu.have you tried it ? Thanks! FredXwang > Date: Thu, 2 May 2013 15:57:39 +0200
From: stefan.tauner@student.tuwien.ac.at To: flashrom@flashrom.org CC: coreboot@coreboot.org Subject: [coreboot] Looking for dediprog users...
hi,
if you are using an sf100 with a firmware version between 2.1.1 and 5.1.2 (non-inclusive), I would like to know from you if flashrom version r1649 or newer works for you or not. Probing for a chip (even if there is none attached) suffices as a test. Apparently earlier versions do not support setting the spi clock rate, but we always do that (since r1649) and fail programmer initialization on those versions. I try to find out which versions support setting the speed.
BTW did anybody try to contact dediprog and request any information that would help flashrom to support their programmers better?
I would also like to know if any dediprog sf300 or sf600 users are reading this and would like to see support for it in flashrom. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot