when i apply the a7v600-x board enable patch to r682 and run it . i get
root@sysresccd /root/A7V600-X % ./flashrom
*flashrom v0.9.0-r682* No coreboot table found. Found chipset "VIA VT8237", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "ASUS A7V600-X"... ERROR: IT8712F SuperIO not found. FAILED! Calibrating delay loop... OK. Found chip "PMC Pm49FL002" (256 KB, LPC,FWH) at physical address 0xfffc0000. No operations were specified.
latest version r701 gives:
root@sysresccd /root % ./flashrom *flashrom v0.9.0-r701* No coreboot table found. Found chipset "VIA VT8237", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "PMC Pm49FL002" (256 KB, LPC,FWH) at physical address 0xfffc0000. No operations were specified.
yet superiotool finds the IT8712F chipset
root@sysresccd /root/A7V600-X % ./superiotool
superiotool r4424 Found ITE IT8712F (id=0x8712, rev=0x5) at 0x2e Found Winbond W83877TF (id=0x0c) at 0x370 Found Winbond W83877TF (id=0x0c) at 0x370 Found Winbond W83877TF (id=0x0c) at 0x370 Found Winbond W83877TF (id=0x0c) at 0x370
find attached more detailed dumps.
NB: The only other modification i did to my local svn was patching with updated flashchips.c timings on both r682 and r701 used here.
Enjoy! Udu