Hello,
I have verified the current flashrom release in git corrects the problem on my system :
sudo flashrom -p internal flashrom v1.2-163-g855d6b6 on Linux 5.10.0-051000-lowlatency (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... Warning: spireadmode not set, leaving spireadmode unchanged.Warning: spispeed not set, leaving spispeed unchanged.OK. Found Winbond flash chip "W25Q128.W" (16384 kB, SPI) mapped at physical address 0x00000000ff000000. No operations were specified.
Thank a lot !
Jean-Paul Crespy
Le 16/12/2020 à 21:52, Clay Daniels a écrit :
Edward, thanks a lot! I did a "git clone https://github.com/flashrom/flashrom https://github.com/flashrom/flashrom Then navigated to flashrom, did a make, make install, (skipped make clean for now) Then: root@clay-MS-7C37:~/flashrom# flashrom -p internal flashrom v1.2-163-g855d6b6 on Linux 5.8.0-25-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... Warning: spireadmode not set, leaving spireadmode unchanged.Warning: spispeed not set, leaving spispeed unchanged.OK. Found Winbond flash chip "W25Q256.W" (32768 kB, SPI) mapped at physical address 0x00000000fe000000. No operations were specified. root@clay-MS-7C37:~/flashrom#
It worked great! I have been looking for this and following it on Gerrit. I see the merge is fresh, 10 hours old. I have a list of at least seven other folks who have 0x59 & 0x61 boards and will notify them too. I do have one who has an 0x51 board with a 0x51 board which is the other email from/to Jean-Paul Crespy. The 0x51 was also listed in Rene Rebe's patch from the flashrom list of Oct 12.
Anyway, thanks for all your work. I did notice you did more than just add 0x59 & 0x61, you made deeper changes that Rene did not think about, and all for the better I must say.
Clay
On Wed, Dec 16, 2020 at 4:32 AM Edward O'Callaghan <quasisec@google.com mailto:quasisec@google.com> wrote:
I just noticed this email while searching for 0x61 and thought I would mention that the support for Ryzen style FCH's is actually done and has merged. Feel free to give the tip of the tree a go for your board and let me know if you have any issues with it! Kind regards, Edward. On Wed, 16 Dec 2020 at 17:20, Clay Daniels <clay.daniels.jr@gmail.com <mailto:clay.daniels.jr@gmail.com>> wrote: On Tue, Dec 15, 2020 at 4:27 PM Jean-Paul Crespy via flashrom <flashrom@flashrom.org <mailto:flashrom@flashrom.org>> wrote: Hello, As indicated in error message (attached file "flashrom.log"), I transmit you the requested information. Best regards Jean-Paul Crespy I have a similar AMD motherboard as you, and when I first tried playing with flashrom at the end of August I installed flashrom on FreeBSD. I got the same message as you: "FCH device found but SMBus revision 0x61 does not match known values." Well, I am retired and messing with computers is my hobby, so I thought maybe trying a Linux would work better with flashrom, and installed Ubuntu. I still got the same message, and no real answer until Rene' Rebe posted this email on Oct 12: https://mail.google.com/mail/u/0/?tab=wm&ogbl#label/coreboot%2Fflashrom/WhctKJWHzSmQKFLjFkZrdWlXtzblWZTQhgLHvjxvmljHgPQLwpSfpwJdZrBqSvCfxLDJskv <https://mail.google.com/mail/u/0/?tab=wm&ogbl#label/coreboot%2Fflashrom/WhctKJWHzSmQKFLjFkZrdWlXtzblWZTQhgLHvjxvmljHgPQLwpSfpwJdZrBqSvCfxLDJskv> What I realized was that I needed to download the source, modify a line to include my particular spi chip, compile and install flashrom myself. I looked at the documentation, asked questions, and IT WORKED. And, besides being able to read my flash chip with flashrom, I have been able to use it to write a stock bios update from MSI on my x570 motherboard, and IT WORKED. The first place to look is here: https://www.flashrom.org/Downloads <https://www.flashrom.org/Downloads> So look at Rene's email & the flashrom download & install info, and ask more questions. Most everyone here is very willing to help. And, there is a fix in the works on Gerrit by the flashrom developers, but it's not yet released. You might enjoy the #flashrom & #coreboot channels on Freenode IRC. Best of luck, Clay _______________________________________________ flashrom mailing list -- flashrom@flashrom.org <mailto:flashrom@flashrom.org> To unsubscribe send an email to flashrom-leave@flashrom.org <mailto:flashrom-leave@flashrom.org>