Re: [flashrom] regression report 0.9.1: Winbond W39V080FA fails

[Stefan Reinauer]

On 2/4/10 12:27 AM, Michael Karcher wrote:
> Am Donnerstag, den 04.02.2010, 00:12 +0100 schrieb Stefan Reinauer:
> > Here's a failure log for a starter
>
> Problem is obvious. In svn r868, where the Winbond chips were changed to
> standard JEDEC procedures the unlocking code (call to
> unlock_winbond_fwhub in erase_winbond_fwhub) got lost. This applies to
> w39v080fa in standard mode and in dual partition mode. As the chip is no
> longer unlocked, erase doesn't work. Write would fail, too.
>
> Regards,
>   Michael Karcher

I can verify that this is the case.

The attached hack fixes erase for me.