Hello Philipp,
thanks for sharing.
On Sat, 27 Oct 2012 15:44:51 +0200 Philipp Wiesner wiesnerph@fh-bingen.de wrote:
I had to make some customizations to ft2232.c add support for this programmer. I had to build a cable which connects the JTAG interface with the on-board SF100 interface.
But it is just a plain cable without logic, i presume i.e. there are no hardware modifications necessary for the TI board nor the iEi mainboard, right?
I like to share as much of the knowledge I acquired as possible with the community. The least thing I can do is send a patch with my modifications for the TI development board. I still need to read the instructions on how to prepare and send patches as I haven't done this in a long time.
How did you obtain the flashrom source (file archive, subversion, git...)? Depending on that the way to obtain a usable diff/patch vary a lot. If you need further help you can also ask us on our IRC channel, #flashrom on freenode, available also via this website: http://webchat.freenode.net/?channels=flashrom&uio=d4