There is no good reason to abort earlier just because some options did not stick. This should improve compatibility without negative effects. If communication is affected by the missing flag(s) then we abort later anyway.
Signed-off-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at --- serial.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/serial.c b/serial.c index 63774a5..b216143 100644 --- a/serial.c +++ b/serial.c @@ -209,12 +209,25 @@ int serialport_config(fdtype fd, unsigned int baud) if (observed.c_cflag != wanted.c_cflag || observed.c_lflag != wanted.c_lflag || observed.c_iflag != wanted.c_iflag || - observed.c_oflag != wanted.c_oflag || - cfgetispeed(&observed) != cfgetispeed(&wanted)) { - msg_perr("%s: Some requested options did not stick.\n", __func__); - return 1; + observed.c_oflag != wanted.c_oflag) { + msg_pwarn("Some requested serial options did not stick, continuing anyway.\n"); + msg_pdbg(" observed wanted\n" + "c_cflag: 0x%08X 0x%08X\n" + "c_lflag: 0x%08X 0x%08X\n" + "c_iflag: 0x%08X 0x%08X\n" + "c_oflag: 0x%08X 0x%08X\n", + observed.c_cflag, wanted.c_cflag, + observed.c_lflag, wanted.c_lflag, + observed.c_iflag, wanted.c_iflag, + observed.c_oflag, wanted.c_oflag + ); + } + if (cfgetispeed(&observed) != cfgetispeed(&wanted) || + cfgetospeed(&observed) != cfgetospeed(&wanted)) { + msg_pwarn("Could not set baud rates exactly\n"); + msg_pdbg("Actual baud flags are: ispeed: 0x%08lX, ospeed: 0x%08lX\n", + (long)cfgetispeed(&observed), (long)cfgetispeed(&wanted)); } - msg_pdbg("Baud rate is %d now.\n", entry->baud); #endif return 0; }