Author: hailfinger Date: Tue Feb 15 23:44:27 2011 New Revision: 1261 URL: http://flashrom.org/trac/flashrom/changeset/1261
Log: Support 64-bit MEM BARs wherever possible. Add more sanity checks for BARs and abort if resources are unreachable. Undecoded resources are reported, but flashrom will proceed anyway just in case the BIOS screwed up the configuration.
(The empty CardBus handler is intentional, according to the spec no BARs in PCI config space are used by CardBus.)
Found while working on a driver for the Angelbird PCIe-based SSD which has 64-bit capable MEM BARs.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Stefan Reinauer stefan.reinauer@coreboot.org
Modified: trunk/pcidev.c trunk/programmer.h
Modified: trunk/pcidev.c ============================================================================== --- trunk/pcidev.c Sat Feb 5 13:11:17 2011 (r1260) +++ trunk/pcidev.c Tue Feb 15 23:44:27 2011 (r1261) @@ -2,6 +2,7 @@ * This file is part of the flashrom project. * * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * Copyright (C) 2010, 2011 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,43 +28,151 @@ struct pci_access *pacc; struct pci_dev *pcidev_dev = NULL;
-uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, +enum pci_bartype { + TYPE_MEMBAR, + TYPE_IOBAR, + TYPE_ROMBAR, + TYPE_UNKNOWN +}; + +uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs) { int i; - /* FIXME: 64 bit memory BARs need a 64 bit addr. */ - uint32_t addr; + uint64_t addr; + uint32_t upperaddr; + uint8_t headertype; + uint16_t supported_cycles; + enum pci_bartype bartype = TYPE_UNKNOWN;
for (i = 0; devs[i].device_name != NULL; i++) { if (dev->device_id != devs[i].device_id) continue;
+ msg_pinfo("Found "%s %s" (%04x:%04x, BDF %02x:%02x.%x).\n", + devs[i].vendor_name, devs[i].device_name, + dev->vendor_id, dev->device_id, dev->bus, dev->dev, + dev->func); + + headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; + msg_pspew("PCI header type 0x%02x\n", headertype); + /* * Don't use dev->base_addr[x] (as value for 'bar'), won't * work on older libpci. */ addr = pci_read_long(dev, bar); - - msg_pinfo("Found "%s %s" (%04x:%04x, BDF %02x:%02x.%x).\n", - devs[i].vendor_name, devs[i].device_name, - dev->vendor_id, dev->device_id, dev->bus, dev->dev, - dev->func); - msg_pdbg("Requested BAR is %s", (addr & 0x1) ? "IO" : "MEM"); - if (addr & 0x1) { - /* Mask off IO space indicator and reserved bit. */ - msg_pdbg("\n"); - addr &= ~0x3; - } else { + + /* Sanity checks. */ + switch (headertype) { + case PCI_HEADER_TYPE_NORMAL: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_2: + case PCI_BASE_ADDRESS_3: + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + if ((addr & PCI_BASE_ADDRESS_SPACE) == + PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; + break; + case PCI_ROM_ADDRESS: + bartype = TYPE_ROMBAR; + break; + } + break; + case PCI_HEADER_TYPE_BRIDGE: + switch (bar) { + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + if ((addr & PCI_BASE_ADDRESS_SPACE) == + PCI_BASE_ADDRESS_SPACE_IO) + bartype = TYPE_IOBAR; + else + bartype = TYPE_MEMBAR; + break; + case PCI_ROM_ADDRESS1: + bartype = TYPE_ROMBAR; + break; + } + break; + case PCI_HEADER_TYPE_CARDBUS: + break; + default: + msg_perr("Unknown PCI header type 0x%02x, BAR type " + "cannot be determined reliably.\n", headertype); + break; + } + + supported_cycles = pci_read_word(dev, PCI_COMMAND); + + msg_pdbg("Requested BAR is "); + switch (bartype) { + case TYPE_MEMBAR: + msg_pdbg("MEM"); + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device " + "has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } msg_pdbg(", %sbit, %sprefetchable\n", ((addr & 0x6) == 0x0) ? "32" : (((addr & 0x6) == 0x4) ? "64" : "reserved"), (addr & 0x8) ? "" : "not "); - /* Mask off Mem space indicator, 32/64bit type indicator - * and Prefetchable indicator. - */ - addr &= ~0xf; + if ((addr & 0x6) == 0x4) { + /* The spec says that a 64-bit register consumes + * two subsequent dword locations. + */ + upperaddr = pci_read_long(dev, bar + 4); + if (upperaddr != 0x00000000) { + /* Fun! A real 64-bit resource. */ + if (sizeof(uintptr_t) != sizeof(uint64_t)) { + msg_perr("BAR unreachable!"); + /* TODO: Really abort here? If + * multiple PCI devices match, + * we might never tell the user + * about the other devices. + */ + return 0; + } + addr |= (uint64_t)upperaddr << 32; + } + } + addr &= PCI_BASE_ADDRESS_MEM_MASK; + break; + case TYPE_IOBAR: + msg_pdbg("I/O\n"); +#if __FLASHROM_HAVE_OUTB__ + if (!(supported_cycles & PCI_COMMAND_IO)) { + msg_perr("I/O BAR access requested, but device " + "has I/O space accesses disabled.\n"); + /* TODO: Abort here? */ + } +#else + msg_perr("I/O BAR access requested, but flashrom does " + "not support I/O BAR access on this platform " + "(yet).\n"); +#endif + addr &= PCI_BASE_ADDRESS_IO_MASK; + break; + case TYPE_ROMBAR: + msg_pdbg("ROM\n"); + /* Not sure if this check is needed. */ + if (!(supported_cycles & PCI_COMMAND_MEMORY)) { + msg_perr("MEM BAR access requested, but device " + "has MEM space accesses disabled.\n"); + /* TODO: Abort here? */ + } + addr &= PCI_ROM_ADDRESS_MASK; + break; + case TYPE_UNKNOWN: + msg_perr("BAR type unknown, please report a bug at " + "flashrom@flashrom.org\n"); } - + if (devs[i].status == NT) { msg_pinfo("===\nThis PCI device is UNTESTED. Please " "report the 'flashrom -p xxxx' output \n" @@ -73,13 +182,13 @@ "your help!\n===\n"); }
- return addr; + return (uintptr_t)addr; }
return 0; }
-uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, +uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs) { struct pci_dev *dev; @@ -87,7 +196,7 @@ char *pcidev_bdf; char *msg = NULL; int found = 0; - uint32_t addr = 0, curaddr = 0; + uintptr_t addr = 0, curaddr = 0;
pacc = pci_alloc(); /* Get the pci_access structure */ pci_init(pacc); /* Initialize the PCI library */
Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sat Feb 5 13:11:17 2011 (r1260) +++ trunk/programmer.h Tue Feb 15 23:44:27 2011 (r1261) @@ -219,8 +219,8 @@ const char *vendor_name; const char *device_name; }; -uint32_t pcidev_validate(struct pci_dev *dev, uint32_t bar, const struct pcidev_status *devs); -uint32_t pcidev_init(uint16_t vendor_id, uint32_t bar, const struct pcidev_status *devs); +uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs); +uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs); /* rpci_write_* are reversible writes. The original PCI config space register * contents will be restored on shutdown. */