Hi!
I'm trying to flash an ENE KB9012QF A3 KBC on LA-8241P motherboard. The problem is flashrom can't detect the internal SPI of it, fails with error.
flashrom p1.0-141-g9cecc7e on Linux 4.15.0-20-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.2, GCC 7.3.0, little endian Command line (5 args): ./flashrom -p rayer_spi -c KB9012 (EDI) -V Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing rayer_spi programmer Using address 0x378 as I/O base for parallel port access. Using RayeR SPIPGM pinout. The following protocols are supported: SPI. Probing for ENE KB9012 (EDI), 128 kB: edi_chip_probe: reading hwversion failed No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.
How to get it working? Thanks a lot for help!