On Wed, 8 Jul 2015 23:24:52 -0500 Bruno Rocca brunorocca@outlook.com wrote:
Good evening, I have used flashrom for DOS on two NICs (Realtek and Intel) and have successfully flashed 128KB chips (AMD and SST). I also have a 3Com 3C905-TX, but flashrom does not support it. The vendor ID is 10B7 and the device ID is 9050. Is there any way to force flashrom to flash with this NIC? I hope this can be done. Thank you very much for your help, flashrom is an excelent tool.
Hi,
there is a pci programmer parameter to select one of multiple PCI devices but I don't think there is a way to force the driver to use it, if it does not in its list of supported devices. I am not exactly sure why we have never added the ID. I think Idwer had problem with his model, but apparently someone has used the following patch successfully but it was not merged. http://patchwork.coreboot.org/patch/4086/raw/
I have applied a similar patch (attached) and built a DOS executable for you: http://buildbot.flashrom.org/buildresults/flashrom-000180-Hie/dos/flashrom.e...