On Mon, 22 Apr 2013 13:24:44 -0700 Skip WB6YMH wb6ymh@gfrn.org wrote:
I'd like to let you know that I successfully programmed the above chip using a ft2232 based "TUMPA" interface card. I've programmed two chips on two separate boards, but worked fine and booted Linux.
I did get one "get_buf failed: 1 ftdi_write_data: -19, usb bulk write failed send_buf failed at end: 1 FAILED."
Error, but that probably has nothing to do with the MX25L12805(D) chip.
Thanks for the code !
Skip
Hello Skip,
thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes.
Please include the complete log in future reports (and an additional one with verbose output (-V) if the normal run did not include that). That's especially interesting for error cases such as the one you mentioned. Do you remember when the error occurred exactly?