Am Sonntag, den 11.07.2010, 17:32 +0400 schrieb Alex Loktionoff:
Good day, I have flashing problem.
The Pm49FL004T flash recognized automatically. I can read it no problem.
But I can't re-flash it.
That's the typical symptom of a board needing a board enable. That's a small piece of code that tells the board to release the "write protect" pin from the flash chip to enable re-flashing.
If you send us the output of "lspci -nnvvvxxx", "superiotool -deV" (get superiotool from http://www.coreboot.org/Superiotool#Installation), and finally a link to an official BIOS update for your board, we can add support for that board to flashrom.
Regards, Michael Karcher