[flashrom] [commit] r1599 - trunk

[repository service]

Author: stefanct
Date: Mon Sep 17 02:40:54 2012
New Revision: 1599
URL: http://flashrom.org/trac/flashrom/changeset/1599

Log:
Allow to select FTDI device by serial number.

Requires libftdi > 0.5 (2004, commit ID a8f46ddc1595b1b07abfcce613acdafe5b8ddf9d).
Idea stolen from chromiumos commit 5eb5624aeb7e2ee483e2fa0823c4e634c8ea3e68:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=comm...

Signed-off-by: Shik Chen 
Signed-off-by: Stefan Tauner 
Acked-by: Stefan Tauner

Modified:
   trunk/flashrom.8
   trunk/ft2232_spi.c

Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8	Mon Sep 17 02:05:44 2012	(r1598)
+++ trunk/flashrom.8	Mon Sep 17 02:40:54 2012	(r1599)
@@ -573,6 +573,15 @@
 and the default interface is
 .BR B .
 .sp
+If there is more than one ft2232_spi-compatible device connected, you can select which one should be used by
+specifying its serial number with the
+.sp
+.B "  flashrom -p ft2232_spi:serial=number"
+.sp
+syntax where
+.B number
+is the serial number of the device (which can be found for example in the output of lsusb -v).
+.sp
 All models supported by the ft2232_spi driver can configure the SPI clock rate by setting a divisor. The
 expressible divisors are all even numbers between 2 and 2^17 (=131072) resulting in SPI clock frequencies of
 6 MHz down to about 92 Hz for 12 MHz inputs. The default divisor is set to 2, but you can use another one by

Modified: trunk/ft2232_spi.c
==============================================================================
--- trunk/ft2232_spi.c	Mon Sep 17 02:05:44 2012	(r1598)
+++ trunk/ft2232_spi.c	Mon Sep 17 02:40:54 2012	(r1599)
@@ -283,7 +283,9 @@
    	msg_perr("Unable to select interface: %s\n", ftdic->error_str);
    }

-	f = ftdi_usb_open(ftdic, ft2232_vid, ft2232_type);
+	arg = extract_programmer_param("serial");
+	f = ftdi_usb_open_desc(ftdic, ft2232_vid, ft2232_type, NULL, arg);
+	free(arg);

if (f < 0 && f != -5) {
    	msg_perr("Unable to open FTDI device: %d (%s)\n", f,