Your log looks right to me, like a file has been programmed into your chip successfully. How did you check that the writing operation was a failure instead?
P.S. I hope that your 1.8V chip wasn't partially damaged by a temporary usage of 3.3V on it
On Tue, Nov 23, 2021 at 11:23 PM Сергей Янович sergei.ianovich@yandex.ru wrote:
Hi.
This chip is a 1.8V one. I tried to flash it with RPi 3.3V spi, but failed. Reads were unstable. Now I can reliably read it by having a TI ALVC164245 between RPi and the chip. The chip seems erased, but I cannot write anything to it. Attaching a log of
# flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=5000 -VVV -w 8.bin
Thanks! _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org