following my previous email, I changed the type to 2232H,port=A and now I get an error: Unable to open FTDI device: -3 (device not found).
sudo flashrom -p ft2232_spi:type=2232H,port=A -r dump.rom -V flashrom v0.9.6.1-r1563 on Linux 4.4.0-31-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (5 args): flashrom -p ft2232_spi:type=2232H,port=A -r dump.rom -V Calibrating delay loop... OS timer resolution is 1 usecs, 3034M loops per second, delay more than 10% too short (got 87% of expected delay), recalculating... 3057M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 3127M loops per second, 10 myus = 9 us, 100 myus = 170 us, 1000 myus = 1020 us, 10000 myus = 9658 us, 4 myus = 4 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H interface A Unable to open FTDI device: -3 (device not found) Error: Programmer initialization failed.
On Sun, Apr 7, 2019 at 3:51 PM iafdan iafdan@gmail.com wrote:
Hi all,
I'm trying to dump a chip using the following command: sudo flashrom -p ft2232_spi:type=232H,port=A,divisor=16 -r dump.rom -V
For some reason I'm getting an error. Can anybody help me? "Initializing ft2232_spi programmer Error: Invalid device type specified. Unhandled programmer parameters: port=A,divisor=16 Error: Programmer initialization failed."
I also tried: sudo flashrom -p ft2232_spi:type=232H -r dump.rom -V got the same error.
help :)
Thanks! Dan