Author: hailfinger Date: Sat May 5 22:43:42 2012 New Revision: 1529 URL: http://flashrom.org/trac/flashrom/changeset/1529
Log: Function to enable the flash interface on w83697 family SuperIO chips. Not hooked up to the superio detection framework yet.
Signed-off-by: David Borg borg.db@gmail.com Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/board_enable.c
Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed May 2 22:08:01 2012 (r1528) +++ trunk/board_enable.c Sat May 5 22:43:42 2012 (r1529) @@ -380,6 +380,39 @@ w836xx_ext_leave(port); }
+/** + * Enable MEMW# and set ROM size to max. + * Supported chips: + * W83697HF/F/HG, W83697SF/UF/UG + */ +void w83697xx_memw_enable(uint16_t port) +{ + w836xx_ext_enter(port); + if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */ + if((sio_read(port, 0x2A) & 0xF0) == 0xF0) { + + /* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM */ + /* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */ + /* These bits are reserved on W83697HF/F/HG */ + /* Shouldn't be needed though. */ + + /* CR28 Bit3 must be set to 1 to enable flash access to */ + /* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG. */ + /* This bit is reserved on W83697HF/F/HG which default to 0 */ + sio_mask(port, 0x28, 0x08, 0x08); + + /* Enable MEMW# and set ROM size select to max. (4M)*/ + sio_mask(port, 0x24, 0x28, 0x38); + + } else { + msg_perr("WARNING: Flash interface in use by GPIO!\n"); + } + } else { + msg_pinfo("BIOS ROM is disabled\n"); + } + w836xx_ext_leave(port); +} + /* * Suited for: * - EPoX EP-8K5A2: VIA KT333 + VT8235