Hi Ulf,
it looks like we can recover this machine, but it's difficult to do that over e-mail. Can you join #flashrom at irc.freenode.net ? If joining IRC directly is not possible at your place, you can try http://webchat.freenode.net/
On 22.09.2009 23:03, Ulf Mehlig wrote:
I courageously tried to flash my Shuttle xpc SN25P10-H3Ih00-13's bios via flashrom after writing my original bios to a file ("flashrom -r test.img"). Then, I tried to write the most recent flash image provided by Shuttle to the bios, which failed. Writing back the previously saved file failed, too, with a different error message. The machine is still switched on.
Good. As long as the machine is on, we can try to fix it.
I have edited the log below to show the most important parts.
ulf-pc:~# flashrom -w /tmp/floppy/fn25s02a.bin flashrom v0.9.1-r706 Found chipset "NVIDIA CK804", enabling flash write... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) Writing flash chip... Programming page: 0007 at address: 0x00070000 COMPLETE. Verifying flash... VERIFY FAILED at 0x00005455! Expected=0xff, Read=0xaa, failed byte count from 0x00000000-0x0007ffff: 0x50d2
I have never seen the above message combination before: Apparently working erase, but still the old contents there. Unless there is some magic thing (odd timing) happening, I can't explain this.
ulf-pc:~# flashrom -w test.img flashrom v0.9.1-r706 No coreboot table found. Found chipset "NVIDIA CK804", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) Writing flash chip... ERASE FAILED at 0x0006b000! Expected=0xff, Read=0x00, failed byte count from 0x00060000-0x0006ffff: 0x3e21
Now this I can explain. We need a board enable and you're good to go.
Regards, Carl-Daniel