Hi Stefan,
It seems like I am missing something : bibi@k9n6sgm-v:~/flashrom$ sudo flashrom -V flashrom v0.9.6.1-r1599 on Linux 3.2.0-30-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (1 args): flashrom -V Please select a programmer with the --programmer parameter. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, ft2232_spi, serprog, buspirate_spi, rayer_spi, pony_spi, nicintel, nicintel_spi, ogp_spi, satamv, linux_spi
I applied the patch with the command : patch < Fintek-SPI-driver-based-off-it87spi.patch
What is wrong ?! Thanks for your help. Benoit
2012/9/15 Stefan Tauner stefan.tauner@student.tuwien.ac.at:
Hi!
Thanks for the log. It seems like your board uses a superio chip that is not supported by flashrom yet. Carl-Daniel is working on a patch for it, but it does (or should) only detect that chip at the moment - it does not enable read or write access yet. Please do not expect flashrom to work on that board soon, sorry.
If you want to help us add support for that board please get the source of flashrom from http://flashrom.org/Downloads#Installation_from_source apply the patch below, compile it and reply with a verbose log again. If you need help with that just ask or visit our IRC channel (#flashrom on chat.freenode.net).
the current patch: http://patchwork.coreboot.org/patch/3713/
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner