Hi,
thank you for the great tool it saved me from messing ouround with DOS boot dics etc on a system which is purely running on Linux.
I updated the bios of this board and in case the diagnostic output of this board is interesting for you, here is it:
juergen@media:/scratch/software/bios$ sudo flashrom [sudo] password for juergen: flashrom v0.9.5.2-r1517 on Linux 3.2.0-25-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "NVIDIA MCP67". Enabling flash write... This chipset is not really supported yet. Guesswork... SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom@flashrom.org, thanks! Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. Please send the output of "flashrom -V" to flashrom@flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified.