Add entries of W25x32 and W25x64. The modle_ids are already in the header.
W25x32 has been successfully probed. W25x64 is not available. I just get information from datasheet.
Signed-off-by: Zheng Bao zheng.bao@amd.com
Index: flashchips.c =================================================================== --- flashchips.c (revision 781) +++ flashchips.c (working copy) @@ -3038,6 +3038,38 @@
{ .vendor = "Winbond", + .name = "W25x32", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = W_25X32, + .total_size = 4096, + .page_size = 256, + .tested = TEST_OK_PROBE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .erase = spi_chip_erase_c7, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Winbond", + .name = "W25x64", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = W_25X64, + .total_size = 8192, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .erase = spi_chip_erase_c7, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Winbond", .name = "W29C011", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID,