HI!
"sudo flashrom" doesn't cause any problems now.
"sudo flashrom -r BACKUP.ROM" works also tho the created file is smaller than the downloaded file.
-rw-r--r-- 1 root root 524288 2010-04-12 00:36 BACKUP.ROM -rw-r--r-- 1 magnus magnus 525894 2004-10-19 09:32 ZI5_3C23.WPH
That might not be so strange if the downloaded file also contains information about "magic bits".
/Magnus
2010/4/12 Michael Karcher flashrom@mkarcher.dialup.fu-berlin.de:
BE WARNED: FLASHROM COMES WITH NO WARRANTY! THIS IS ESPECIALLY TRUE FOR LAPTOPS, AND ESPECIALLY ESPECIALLY TRUE FOR LAPTOPS WITH SHARED EC. Nevertheless, I think that trying to *read* flash contents with this patch is not more unsafe than reading without this patch. Be warned that a crashed EC might mean no fan control. Don't even *THINK* about erase/write until read works fine!
This is the first system with EC sleep support in flashrom, and the first user of the register_shutdown infrastructure.
PCI match uses one out of many chips with subsystem ID Acer:0x0057, and also the northbridge (with bogus subsystem ID). DMI match added just for safety, as fiddling with the KBC is dangerous.
Signed-off-by: Michael Karcher flashrom@mkarcher.dialup.fu-berlin.de
board_enable.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 100 insertions(+), 0 deletions(-)
diff --git a/board_enable.c b/board_enable.c index f1f7953..ce82131 100644 --- a/board_enable.c +++ b/board_enable.c @@ -29,6 +29,66 @@ #include "flash.h"
/*
- Functions for EC/KBC communication
- port = 0x60 for KBC, port = 0x62 (typically) for EC
- */
+static int wait_uc_writebuf_empty(uint16_t port) +{
- int count;
- for (count = 0; count < 50; count++)
- {
- /* quit if OBF bit clear */
- if (!(INB(port + 4) & 2))
- return 0;
- usleep(10000);
- }
- return -1;
+}
+static int wait_uc_readbuf_full(uint16_t port) +{
- int count;
- for (count = 0; count < 50; count++)
- {
- /* quit if IBF bit set */
- if (INB(port + 4) & 1)
- return 0;
- usleep(10000);
- }
- return -1;
+}
+static int uc_send_command(uint16_t port, uint8_t command) +{
- if (wait_uc_writebuf_empty(port) != 0)
- return -1;
- OUTB(command, port + 4);
- return 0;
+}
+#if 0 +static int uc_send_data(uint16_t port, uint8_t command) +{
- if (wait_uc_writebuf_empty(port) != 0)
- return -1;
- OUTB(command, port);
- return 0;
+} +#endif
+static int uc_read_data(uint16_t port) +{
- if (wait_uc_readbuf_full(port) != 0)
- return -1;
- return INB(port);
+}
+static void uc_flush_data(uint16_t port) +{
- INB(port);
+}
+/* * Helper functions for many Winbond Super I/Os of the W836xx range. */ /* Enter extended functions */ @@ -1307,6 +1367,45 @@ static int it8712f_gpio3_1_raise(const char *name) return it8712f_gpio_set(32, 1); }
+static void send_kbc_command(void * cmdptr) +{
- uc_send_command(0x60, *(uint8_t*)cmdptr);
+}
+static int board_acer_ferrari3400(const char *name) +{
- static uint8_t enable_command = 0xAA;
- uint16_t pmio_base;
- struct pci_dev * dev;
- dev = pci_dev_find(0x1106, 0x3177);
- if (!dev)
- {
- fprintf(stderr, "ERROR: %s - Can't find VT8235\n", name);
- return -1;
- }
- pmio_base = pci_read_word(dev, 0x88) & 0xFF80;
- if (pmio_base == 0 || pmio_base == 0xFF80)
- {
- fprintf(stderr, "ERROR: %s - invalid PMIO base %04x\n",
- name, pmio_base);
- return -1;
- }
- usleep(100000); /* Give the user a fair chance to release enter
- before killing keyboard/mouse */
- uc_flush_data(0x60);
- register_shutdown(send_kbc_command, &enable_command);
- if (INB(pmio_base + 4) & 1)
- uc_send_command(0x60, 0xE5); /* ACPI mode */
- else
- uc_send_command(0x60, 0xD8); /* APM/legacy mode */
- uc_read_data(0x60); /* wait for EC shutdown */
- return 0;
+}
/** * Below is the list of boards which need a special "board enable" code in * flashrom before their ROM chip can be accessed/written to. @@ -1356,6 +1455,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x10de, 0x0050, 0x147b, 0x1c1a, 0, 0, 0, 0, NULL, NULL, NULL, "Abit", "KN8 Ultra", 0, NT, nvidia_mcp_gpio2_lower}, {0x10de, 0x01e0, 0x147b, 0x1c00, 0x10de, 0x0060, 0x147B, 0x1c00, NULL, NULL, NULL, "Abit", "NF7-S", 0, OK, nvidia_mcp_gpio8_raise}, {0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, NULL, "abit", "vt6x4", "Abit", "VT6X4", 0, OK, via_apollo_gpo4_lower},
- {0x1106, 0x3177, 0x1025, 0x0057, 0x1106, 0x3188, 0x1106, 0x3188, "^Ferrari 3400", NULL, NULL, "Acer", "Ferrari 3400", 0, OK, board_acer_ferrari3400},
{0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, OK, w83627hf_gpio24_raise_2e}, -- 1.7.0