Hi Stefan,
Das Board ist ein MSI h61mu-e35 (b3)
writing hab ich schiss es zu verschroten, ist nagelneu und brauche auch bis jetzt kein bios-update (obwohl neueres bios released).
reading habe ich gerade probiert:
---------- [studio@myhost ~]$ sudo flashrom -r ~/temp/flashread flashrom v0.9.4-r1395 on Linux 3.0-rt (i686), built with libpci 3.1.8, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. sh: dmidecode: comando não encontrado dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel H61". This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... OK. This chipset supports the following protocols: FWH, SPI. Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Reading flash... done. ----------
Gruss Fábio
Em Wed, 30 Nov 2011 23:37:13 +0100 Stefan Tauner stefan.tauner@student.tuwien.ac.at escreveu:
Hello Fabio!
From what i can tell from your log, the board will most probably be fully supported by flashrom. Have you tried reading and or writing? Which mainboard is it?