On Sat, 2012-05-19 at 21:50 +0200, Paul Menzel wrote:
Dear Kyösti,
Am Samstag, den 19.05.2012, 22:09 +0300 schrieb Kyösti Mälkki:
This flash is like PMC model Pm39LV010 but capacity is 64kB.
could you add a link to the data sheet to the commit message?
Done. I found no official site, though.
Model ID was already defined, PREW works for me.
Could you also sent the output of `flashrom -Vr` and the other commends to the list for archival purposes.
I will do so. I used IT8212F PCI PATA card as a programmer, need to submit that patch too.
Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com
Index: flashrom-pmc64k/flashchips.c
--- flashrom-pmc64k/flashchips.c (revision 1538) +++ flashrom-pmc64k/flashchips.c (working copy) @@ -5267,6 +5267,36 @@
{ .vendor = "PMC",
.name = "Pm39LV512",
If this list is sorted, it should go after »Pm39LV010«.
Done. It's after Pm39LV040 now.
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM39LV512,
.total_size = 64,
.page_size = 4096,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
- },
- {
.name = "Pm39LV010", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX,.vendor = "PMC",
With the above comments addressed, you can add
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
to the [PATCH v2].
Done.
Thanks,
Paul _______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom