In r1577 we removed the discrimination of coreboot IDs and user-specified mainboards. The problem is that the board enable code required to find a board enable if either of these model strings were set. Therefore boards running coreboot that do not need a board enable failed to execute flashrom since then. This patch fixes this by handling coreboot IDs and user-supplied IDs differently again.
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- board_enable.c | 20 +++++++++++++++----- internal.c | 10 +++------- programmer.h | 2 +- 3 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/board_enable.c b/board_enable.c index 2668f10..bdd5ebb 100644 --- a/board_enable.c +++ b/board_enable.c @@ -2493,7 +2493,6 @@ static const struct board_match *board_match_name(const char *vendor, const char if (partmatch) return partmatch;
- msg_perr("No suitable board enable found for vendor="%s", model="%s".\n", vendor, model); return NULL; }
@@ -2603,16 +2602,27 @@ void board_handle_before_laptop(void) board_handle_phase(P2); }
-int board_flash_enable(const char *vendor, const char *model) +int board_flash_enable(const char *vendor, const char *model, const char *cb_vendor, const char *cb_model) { const struct board_match *board = NULL; int ret = 0;
- if (vendor && model) { + if (cb_vendor != NULL && cb_model != NULL) { + board = board_match_name(cb_vendor, cb_model); + if (!board) { /* Failure is an option here, because many cb boards don't require an enable. */ + msg_pdbg2("No board enable found matching coreboot IDs vendor="%s", model="%s".\n", + vendor, model); + } + } + if (board == NULL && vendor && model) { board = board_match_name(vendor, model); - if (!board) /* if a board was given it has to match, else we abort here. */ + if (!board) { /* If a board was given by the user it has to match, else we abort here. */ + msg_perr("No suitable board enable found for vendor="%s", model="%s".\n", + vendor, model); return 1; - } else { + } + } + if (board == NULL) { board = board_match_pci_ids(P3); if (!board) /* i.e. there is just no board enable available for this board */ return 0; diff --git a/internal.c b/internal.c index 7b6cff2..b4414a5 100644 --- a/internal.c +++ b/internal.c @@ -257,12 +257,8 @@ int internal_init(void) }
#if defined(__i386__) || defined(__x86_64__) - if (cb_parse_table(&cb_vendor, &cb_model) == 0) { /* coreboot IDs valid */ - /* If no -p internal:mainboard was given but there are valid coreboot IDs then use those. */ - if (board_vendor == NULL || board_model == NULL) { - board_vendor = cb_vendor; - board_model = cb_model; - } else if (strcasecmp(board_vendor, cb_vendor) || strcasecmp(board_model, cb_model)) { + if ((cb_parse_table(&cb_vendor, &cb_model) == 0) && (board_vendor != NULL) && (board_model != NULL)) { + if (strcasecmp(board_vendor, cb_vendor) || strcasecmp(board_model, cb_model)) { msg_pinfo("WARNING: The mainboard IDs set by -p internal:mainboard (%s:%s) do not\n" " match the current coreboot IDs of the mainboard (%s:%s).\n", board_vendor, board_model, cb_vendor, cb_model); @@ -339,7 +335,7 @@ int internal_init(void) init_superio_ite(); #endif
- if (board_flash_enable(board_vendor, board_model)) { + if (board_flash_enable(board_vendor, board_model, cb_vendor, cb_model)) { msg_perr("Aborting to be safe.\n"); return 1; } diff --git a/programmer.h b/programmer.h index 51b9c40..dedec67 100644 --- a/programmer.h +++ b/programmer.h @@ -256,7 +256,7 @@ void sio_write(uint16_t port, uint8_t reg, uint8_t data); void sio_mask(uint16_t port, uint8_t reg, uint8_t data, uint8_t mask); void board_handle_before_superio(void); void board_handle_before_laptop(void); -int board_flash_enable(const char *vendor, const char *model); +int board_flash_enable(const char *vendor, const char *model, const char *cb_vendor, const char *cb_model);
/* chipset_enable.c */ int chipset_flash_enable(void);