Re: [flashrom] [PATCH] add support for Asus P4S800-MX

[David Borg]

Updated the patch to remove anything related to chip  (un)locking, as there
is no way to unlock the superio except by a cold reset.

Logs for the different flashrom runs and the outputs of lspci -nnvvvxxx and
superiotool -deV are also attached.

w836xx_memw_enable will work for this board, however i'd still like to see
the function corrected for completeness sake. I haven't yet found a
datasheet for a superio in the w83627 family where the function is correct,
and the supported superio's all work with sio_mask(port, 0x24, 0x28, 0x38);
Perhaps it should be fixed in a separate patch?

Regards,
David

On 1 July 2010 11:50, David Borg  wrote:
> Patch to add support for the Asus P4S800-MX motherboard and SIS 963
> chipset. Invalidates previous patch: [PATCH] add support for SIS963
>
> If anyone has the output of superiotool -deV for the following working
> boards, please forward them, so I can merge the functions
> w836xx_unlock_memw_enable_2e and w836xx_memw_enable_2e, and maybe fix
> the function w836xx_memw_enable which I believe has a typo, such that
>                sio_mask(port, 0x24, 0x28, 0x28);
> becomes : sio_mask(port, 0x24, 0x28, 0x38);
>
> Motherboards:
> Albatron - PM266A Pro
> ASUS - A7V8X-MX SE
> EPoX - EP-8K5A2
> Shuttle - AK31
> Tyan - S2498 (Tomcat K7M)
> Termtek - TK-3370 (Rev:2.5B)
> MSI - MS-6590 (KT4 Ultra)
> MSI - MS-6712 (KT4V)
> MSI - MS-7005 (651M-L)
>
> Signed-off-by: David Borg
>
> Regards,
> David