Re: [flashrom] regression report 0.9.1: Winbond W39V080FA fails

[Carl-Daniel Hailfinger]

On 03.02.2010 17:17, Stefan Reinauer wrote:
> not much more information yet, but I suggest everyone be careful with
> this release due to work on generalization and restructure that has been
> done.
> The Winbond W39V080FA is the first chip tried here and writing fails
> with flashrom 0.9.1. It worked with 0.9.0. So everyone should take the
> missing test flags very seriously.

Did you test with svn or the (5 months old) 0.9.1 release? I just
checked the difference between 0.9.0 and 0.9.1 for the W39V080FA and
there isn't any.

If you tested with svn, can you please provide a verbose log? I'm aware
that locking/unlocking is basically non-working with current svn and
that might be the reason you see the failure. Patch pending.

Regards,
Carl-Daniel