[added list to CC again]
Maybe there is a specific device which is either incompabitble with the new bios (unlikely) or it is not getting attached correctly. You could try attaching the devices one after the other, and then booting after each addition to identify the problematic device.
Hope this helps! :)
On 4 September 2010 21:05, Shahar Or mightyiampresence@gmail.com wrote:
Hi david,
This seems to be related to power. When one too many periferals are attached it seems to not be able to boot. It boots only after I clear the CMOS. Then it tells me that defaults are loaded when I'll press F1. The next boot won't post until I clear CMOS again. When it is barebones it doesn't give this trouble.
On 9/4/10, David Borg borg.db@gmail.com wrote:
Hi Shahar,
are you able to boot the machine after selecting the option 'Load Optimized Defaults' only and saving the settings?
Regards,
David
On 4 September 2010 18:50, Shahar Or mightyiampresence@gmail.com wrote:
Hi,
Help, please?
Now it is doing something funny. It boots only after I clear the CMOS. After I save BIOS settings it won't even post.
On 9/4/10, Shahar Or mightyiampresence@gmail.com wrote:
Yup, success. It did scare me 'till I cleared the CMOS settings.
On 9/4/10, Shahar Or mightyiampresence@gmail.com wrote:
Dear ones,
The product's page is: http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=234
I've now flashed the latest BIOS update using flashrom. The output of the session is attached. Notice I've done some extra read/writes.
I'm here for questioning.
I've not rebooted yet, so expect another e-mail from me replying to this, stating whether I've managed to boot this machine (or not! I don't have a spare chip to backup the bios on...)
Blessings, Shahar
-- Sent from my mobile device
-- Sent from my mobile device
flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
-- David Borg
-- Sent from my mobile device