2013/10/22 san san@plusnet.pl:
Hi!
I own: 02:00.0 Ethernet controller [0200]: 3Com Corporation 3c905 100BaseTX [Boomerang] [10b7:9050]
It's unsupported: ---[code]--- Error: No supported PCI device found. Error: Programmer initialization failed. ---[/code]---
I would love to help You to get it to work with flashrom. Do You need it?
Regards!
Yes, we would appreciate some testing.
Do you have a parallel DIP32 chip that you can insert into its socket? Either SST39SF512, CAT28F125 or AT29C512 should work: http://www.ebay.com/sch/i.html?_nkw=SST39SF512 http://www.ebay.com/sch/i.html?_nkw=CAT28F512 http://www.ebay.com/sch/i.html?_nkw=AT29C512
When you have that set up, apply this patch:
Index: nic3com.c =================================================================== --- nic3com.c (revision 1760) +++ nic3com.c (working copy) @@ -37,6 +37,9 @@ static uint16_t id;
const struct dev_entry nics_3com[] = { + /* 3C905 */ + {0x10b7, 0x9050, NT, "3COM", "3c905: Fast EtherLink XL PCI (3c905-TX)"}, + /* 3C90xB */ {0x10b7, 0x9055, OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"}, {0x10b7, 0x9001, NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },