On Sun, Jan 31, 2010 at 10:27:35PM +0100, Luc Verhaegen wrote:
On Sun, Jan 31, 2010 at 09:13:07PM +0100, repository service wrote:
Author: uwe Date: Sun Jan 31 21:13:06 2010 New Revision: 887 URL: http://flashrom.org/trac/coreboot/changeset/887
Log: Add the Tekram P6Pro-A5 board as supported (trivial).
The board doesn't need a board-enable, writing works out of the box.
Also, the board can only decode 256KB. I verified this by writing a 512KB image of random bytes (which fails), whereas 256KB of random bytes can be written correctly.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/board_enable.c trunk/print_wiki.c
Modified: trunk/board_enable.c
--- trunk/board_enable.c Fri Jan 29 00:55:12 2010 (r886) +++ trunk/board_enable.c Sun Jan 31 21:13:06 2010 (r887) @@ -1235,6 +1235,7 @@ {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, NULL, "Shuttle", "FN25", 0, board_shuttle_fn25}, {0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x3058, 0x15DD, 0x7609, NULL, NULL, NULL, "Soyo", "SY-7VCA", 0, board_soyo_sy_7vca}, {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", 0, w836xx_memw_enable_2e},
- {0x1106, 0x3038, 0x0925, 0x1234, 0, 0, 0, 0, NULL, NULL, NULL, "Tekram", "P6Pro-A5", 256, NULL}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, NULL, "VIA", "EPIA M/MII/...", 0, via_vt823x_gpio15_raise}, {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, NULL, "VIA", "EPIA-N/NL", 0, via_vt823x_gpio9_raise}, {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, NULL, NULL, NULL, "VIA", "PC3500G", 0, it87xx_probe_spi_flash},
Second set of ids.
Luc Verhaegen.
Also, where are the lspci -vvnnxxx; flashrom -V and superio -deV outputs that we require for board enables? I seem unable to find them on the list.
Luc Verhaegen.