Hi.
Yes, I was able to flash that this chip on arduino. I was hesitant to change value of .tested field because my setup was somewhat 'wacky' - long wires and stuff, and flashing was not very stable. But this instability was probably due to my setup, not because of code/arduino/chip, so I guess you can change it to TEST_OK_PREW.
Thanks. Nikolay.
2014-05-03 9:00 GMT-04:00 Stefan Tauner stefan.tauner@alumni.tuwien.ac.at:
On Sun, 9 Mar 2014 22:20:23 -0400 Nikolay Martynov mar.kolya@gmail.com wrote:
- Updated according to manufacturers datasheet (to the best of my abilities to read it)
- Tested with actual S25FL164K via arduino spi
Signed-off-by: Nikolay Martynov mar.kolya@gmail.com
Hello Nikolay,
thank you very much for the patch; it looks very good on a first glance. I need to verify it with the datasheet but I have a small nitpick/question before that: You wrote that you have tested the patch with the S25FL164K but the .tested field of the respective chip does not reflect that. May I assume that the .tested field of the S25FL164K should be set to TEST_OK_PREW?
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner