[flashrom] Re: Spansion S25FL127S with 16 MB

[Mike Banon]

Yes, you will need to build a latest flashrom version (i.e. git clone)
from source. Luckily it's pretty easy to build - and, if any
questions, you could always ask us.

On Sun, Aug 23, 2020 at 3:56 PM  wrote:
> Hallo,
>
> I use flashrom on a Raspberry PI 4 ( Version 1.0-1)
> Need i building it from the source on a PI 4 ? Bacause is is not version 1.2 and when i need to update
> on 1.2 how on PI 4 ?
> --
> Sicher gesendet mit Tutanota. Hol dir deine eigene verschlüsselte & werbefreie Mailbox:
> https://tutanota.com
> Aug. 2020, 12:32 von [e-mail]:
>
> What flashrom version are you using? Maybe yours is outdated? Try
> building it from the source
>
> On Wed, Aug 12, 2020 at 10:35 AM ruckzuck--- via flashrom
>  wrote:
>
> Hallo,
>
> If i make Flashrom -L i see in the List only listet :
>
> Spansion S25FL127S-64kB PREW 16384 SPI
> Spansion S25FL127S-256kB 16384 SPI
>
> But not Spansion S25FL127S-128kB for me that lock so that it is not supported
> Need Flashrom a update for the chip ? i think yes.
>
> best reguards
> zuck
> Juli 2020, 18:38 von [e-mail]:
>
> allo,
>
> In the End of the Program is written that i send you this:
>
> I try to flash the S25FL127S with 16 MB but in the list is it not
>
> then i try with S25FL127S-256kB and this happen:
>
> flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1000 -w out.bin -c S25FL127S-256kB
> flashrom on Linux 4.19.118+ (armv6l)
> flashrom is free software, get the source code at https://flashrom.org
>
> Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
> Found Spansion flash chip "S25FL127S-256kB" (16384 kB, SPI) on linux_spi.
> ===
> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to [e-mail] if any of the above operations
> work correctly for you with this flash chip. Please include the flashrom log
> file for all operations you tested (see the man page for details), and mention
> which mainboard or programmer you tested in the subject line.
> Thanks for your help!
> Reading old flash chip contents... done.
> Erasing and writing flash chip... spi_nbyte_program called for too long a write
> Reading current flash chip contents... done. Looking for another erase function.
> spi_nbyte_program called for too long a write
> Reading current flash chip contents... done. Looking for another erase function.
> spi_nbyte_program called for too long a write
> Reading current flash chip contents... done. Looking for another erase function.
> Looking for another erase function.
> Looking for another erase function.
> No usable erase functions left.
> FAILED!
> Uh oh. Erase/write failed. Checking if anything has changed.
> Reading current flash chip contents... done.
> Good, writing to the flash chip apparently didn't do anything.
> Please check the connections (especially those to write protection pins) between
> the programmer and the flash chip. If you think the error is caused by flashrom
> please report this on IRC at chat.freenode.net (channel #flashrom) or
> mail [e-mail], thanks!
>
> Need Flashrom a update for the chip ?
>
> best reguards
>
> zuck
>
> flashrom mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]