Ok, thanks! I have committed a variation of your patch in r1945 but left
the status as untested. Thanks, I'm very pleased to see my work hadn't been in vain.
The circuit power is totally on ham choice. Usually, 5V from USB or PC PSU molex and LDO for 3.3V + some cap ~10mF after it. If previous image is copyrighted, I have another one. :)
Best regards, Max Arephin.
2016-02-28 20:09 GMT+03:00 Stefan Tauner stefan.tauner@alumni.tuwien.ac.at :
On Sun, 28 Feb 2016 15:27:09 +0300 Max flammaden@gmail.com wrote:
SPI read was tested. Write wasn't, because of sudden AC voltage blackout and I haven't had any more effort going to collecting build tools and struggling with build process. It's buffer enable pin is hardwired, so no control required.
Ok, thanks! I have committed a variation of your patch in r1945 but left the status as untested.
In attachment there are SPI-TT schematics, so you can add it to man page.
That's easily discoverable (and copyrighted) so we won't include it. However, I was not able to find out how the circuit is powered (most information sources are in russian and translating them automatically was not enough to find out :). I presume Vcc is connected to an external power source, right?
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner
