here is the new output from the hacked superio
Date: Tue, 7 Jul 2009 01:42:04 +0200 From: libv@skynet.be To: flashrom@flashrom.org CC: mechwarrior5@hotmail.com Subject: Re: [flashrom] Asus A7V8X needs a board enable.
On Mon, Jul 06, 2009 at 01:05:00PM +0200, Luc Verhaegen wrote:
On Sun, Jul 05, 2009 at 03:05:59PM +0200, Luc Verhaegen wrote:
Glenn, please attach the output of superio -Vd, we cannot proceed without that.
Luc Verhaegen.
Glenn, please keep the list in the loop and do not break threads.
now, you said the chip read it8703f-a, but i seem to have a hard time digging anything out for this device. I for now am looking at the it8702f-a datasheet.
You were asked to attach the output of superio -Vd. This output, even though it doesn't directly detect your superio, will be sufficient for us to tell what is going on here. So please do so.
Luc Verhaegen.
Glen his superio output (thread got broken again) revealed that his IT8703F identified itself as 0x8701 0x0F on 0x2E.
Attached is a quick hack for superiotool that dumps the gpio registers (copied from ldn 5 of 8705) to this device at ldn 7.
Luc Verhaegen.
_________________________________________________________________ Lauren found her dream laptop. Find the PC that’s right for you. http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290