Calibrating delay loop... 913M loops per second, 100 myus = 204 us. OK. No coreboot table found. Found chipset "ATI(AMD) SB600", enabling flash write... SPI base address is at 0xfec00100 OK. Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for AMD Am29F080B, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x4d, id2 0x49 Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Atmel AT25DF021, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF041A, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF081, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF161, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF321, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF321A, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25DF641, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25F512B, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25FS010, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT25FS040, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF041, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF081A, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF161, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26DF161A, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT26F004, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Atmel AT45CS1282, 16896 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB011D, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB021D, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB041D, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB081D, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB161D, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB321C, 4224 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB321D, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT45DB642D, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for AMIC A25L40P, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=4
The FIFO pointer 6 is 0. [ef][30][14][ef] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x43 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x55, id2 0x43 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x55, id2 0x53 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for Macronix MX25L512, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xff Probing for Macronix MX29LV040C, 512 KB: probe_29f002: id1 0x55, id2 0x53 Probing for Numonyx M25PE10, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x4d, id2 0x49 Probing for Spansion S25FL016A, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF016B, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][14] RDID returned ef 30 14. probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040.REMS, 512 KB: sb600_spi_command, cmd=90, writecnt=3, readcnt=2 [0] [0] [0] [ 0][ 0][ 0]The FIFO pointer 6 is 3. [ef][13] REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: sb600_spi_command, cmd=90, writecnt=3, readcnt=2 [0] [0] [0] [ 0][ 0][ 0]The FIFO pointer 6 is 3. [ef][13] REMS returned ef 13. probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x55, id2 0x53 Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x79, id2 0xc4 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x55, id2 0x53 Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x4d, id2 0x49 Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P10-A, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P20, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P40, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P40-old, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. Probing for ST M25P80, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P16, 2048 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P32, 4096 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P64, 8192 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M25P128, 16384 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST M29F002B, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x55, id2 0x53 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x55, id2 0x43 Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x55, id2 0x53 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x55, id2 0x53 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x4d, id2 0x49 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x4d, id2 0x49 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x55, id2 0x53 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W25x10, 128 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W25x20, 256 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W25x40, 512 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W25x80, 1024 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x55, id2 0x53, id1 parity violation Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x4d, id2 0x49, id1 parity violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0x4d, did 0x49 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x55, did 0x53 Probing for Atmel unknown Atmel SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for EON unknown EON SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for Macronix unknown Macronix SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for PMC unknown PMC SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for SST unknown SST SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 Probing for ST unknown ST SPI chip, 0 KB: sb600_spi_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer 6 is 0. [ef][30][00] RDID returned ef 30 00. probe_spi_rdid_generic: id1 0xef, id2 0x3000 No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically. 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: [a] Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [40] HyperTransport: Retry Mode Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [9c] HyperTransport: #1a 00: 02 10 56 59 06 00 30 22 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 56 59 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 40: 08 54 00 c0 c1 00 00 00 00 00 00 00 42 20 05 00 50: 02 10 56 59 08 9c 00 90 08 10 00 00 00 00 00 00 60: 7d 00 00 00 01 00 00 00 00 02 20 00 60 50 00 78 70: 00 00 00 00 00 00 00 00 c4 89 0f 00 00 00 00 00 80: 00 00 00 00 10 00 00 03 20 01 30 00 31 20 00 00 90: 00 00 00 d0 7d 00 00 00 00 00 00 00 08 00 3c d0 a0: 82 00 00 00 00 00 00 80 00 00 00 00 79 40 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 80 08 40 80 01 20 00 11 11 d0 00 00 00 d0: 60 0a f5 7f 02 00 00 00 00 20 00 00 00 00 00 00 e0: 00 00 05 00 ff ff ff ff e8 00 00 80 ec 00 00 80 f0: 00 00 00 00 00 80 80 00 00 00 00 00 00 00 00 00
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0f00c Data: 4159 Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5956] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> Kernel driver in use: pcieport-driver 00: 02 10 78 59 07 05 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00 20: 90 fe 90 fe 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 1b 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 10 08 00 00 02 0d 30 00 40 00 02 f1 80 25 14 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 42 00 01 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe 59 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 56 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port B) [1002:597b] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0f00c Data: 4161 Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5956] Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> Kernel driver in use: pcieport-driver 00: 02 10 7b 59 07 05 10 40 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 d1 d1 00 00 20: a0 fe a0 fe f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 10 08 00 00 12 0c 30 01 40 00 11 70 80 0c 2c 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe 61 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 56 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7378] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at a000 [size=4] Region 2: I/O ports at 9000 [size=8] Region 3: I/O ports at 8000 [size=4] Region 4: I/O ports at 7000 [size=16] Region 5: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ahci 00: 02 10 80 43 07 01 30 02 00 01 06 01 10 40 00 00 10: 01 b0 00 00 01 a0 00 00 01 90 00 00 01 80 00 00 20: 01 70 00 00 00 f8 8f fe 00 00 00 00 62 14 78 73 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00 40: 10 00 80 02 01 00 10 00 01 00 00 00 00 00 00 00 50: 05 00 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 12 00 10 00 0f 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 06 00 00 2c d6 01 b4 00 d6 01 b4 00 90: d6 01 b4 00 d6 01 b4 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00 b0: 00 00 00 00 00 b8 00 00 00 00 00 00 00 b8 00 00 c0: 00 20 00 00 80 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 87 43 17 01 a0 02 00 10 03 0c 10 40 80 00 10: 00 e0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0f 01 00 00 40: 80 1f 00 00 0a 84 b7 18 07 35 00 00 00 00 00 00 50: 00 9c 00 00 00 00 00 00 ff ff ff ff ff 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 ff 00 00 80 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 88 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 d0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 89 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 c0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 8a 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 b0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 8b 43 17 01 a0 02 00 10 03 0c 10 40 00 00 10: 00 a0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd 00: 02 10 86 43 17 01 b0 02 00 20 03 0c 10 40 00 00 10: 00 f0 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 40 00 0e 08 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 c0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 e4 02 7e 00 00 40 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 0a 00 e0 20 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ 00: 02 10 85 43 03 04 30 02 14 00 05 0c 00 00 80 00 10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 40: d4 2b 00 04 00 00 00 00 0f ff 00 00 00 00 00 00 50: f0 01 f0 0e f0 0f f0 0f 11 0b f0 0f 00 00 00 00 60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f 80: e0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80 90: 01 0b 00 00 bb de ff 00 00 00 00 00 00 00 00 00 a0: 00 00 ff ff ff ff f0 08 00 ff 14 06 16 79 20 18 b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 30 00
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] 00: 02 10 8c 43 05 00 20 02 00 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 ff 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 99 99 00 00 ff ff 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 40 00 10 2c 01 07 01 00 00 00 ff ff 0f 00 70: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00 10: 04 40 8f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 50 00 00 00 00 00 00 00 0f 00 00 00 40: 00 00 02 00 00 00 00 00 00 00 00 00 01 00 00 00 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Micro-Star International Co., Ltd. Device [1462:7376] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 02 10 8d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 76 73 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 04 00 00 00 40 c0 c3 f7 17 ff 42 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 0e 00 00 0e 00 0f 00 f0 ff ff ff 70: 67 45 23 01 00 00 00 00 01 00 00 00 05 00 00 00 80: 08 00 03 a8 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 c0 fe 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 07 01 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 e0 e0 80 22 20: b0 fe b0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 40: 26 00 0c ff 00 00 00 00 0c 01 3f d1 00 00 00 00 50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 18 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: [a] Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00 60: 00 00 03 00 e0 00 00 00 20 a8 4e 01 20 f8 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 20 11 11 60 0a f5 ff 13 00 00 00 90: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 00 e0 00 80 ff ef 00 03 00 f0 00 00 ff ff 00 b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 ff df 00 c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 f0: 03 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: e0 3e 78 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 06 00 48 0e 00 00 00 00 80: 05 00 00 00 00 00 00 00 24 fa 7c 5d 45 03 22 00 90: 10 00 01 00 0b 80 58 7f 07 03 00 80 00 00 00 00 a0: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 12 23 4e de 9b 00 00 00 7b 03 00 10 2c 08 a0 02 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: cd 25 62 27 fc fd 10 3f 56 d5 c8 5d f8 2f 20 58 e0: e9 5e 3c c6 70 1f 32 06 44 60 ba a3 1b 4d 30 1a f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: 00 01 00 00 5c 00 b0 4a 00 00 00 00 00 00 00 00 50: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 04 00 24 34 c0 00 00 30 52 80 01 00 70: 53 11 04 00 01 01 18 00 14 0c 20 00 14 09 09 00 80: 81 e6 00 e6 e6 41 e6 01 08 00 00 00 00 40 40 00 90: 03 00 00 00 10 00 00 00 00 01 2f 01 00 00 00 00 a0: 00 08 02 a0 80 18 0c 29 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 75 38 02 80 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 25 0f 81 c8 16 1c 00 03 22 63 47 01 e0: 00 00 00 00 30 0c c0 1f 79 7f 07 02 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 42 0f 10 00
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4870] [1002:9440] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:8030] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c000 [size=256] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0f00c Data: 4189 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: fglrx_pci Kernel modules: fglrx 00: 02 10 40 94 07 05 10 00 00 00 00 03 10 00 80 00 10: 0c 00 00 d0 00 00 00 00 04 00 9f fe 00 00 00 00 20: 01 c0 00 00 00 00 00 00 00 00 00 00 62 14 30 80 30: 00 00 9c fe 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 30 80 50: 01 58 03 06 00 00 00 00 10 a0 12 00 a0 8f 2c 01 60: 10 09 00 00 02 0d 00 00 40 00 02 11 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 02 00 01 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 00 81 00 0c f0 e0 fe 00 00 00 00 89 41 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30] Subsystem: Micro-Star International Co., Ltd. Device [1462:aa30] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9ec000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: HDA Intel 00: 02 10 30 aa 07 01 10 00 00 00 03 04 10 00 80 00 10: 04 c0 9e fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 30 aa 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 30 aa 50: 01 58 03 06 00 00 00 00 10 a0 12 00 a0 8f 2c 01 60: 10 09 00 00 02 0d 00 00 40 00 02 11 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:376c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Vital Product Data <?> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/2 Enable+ Address: 00000000fee0f00c Data: 4171 Capabilities: [60] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [84] Vendor Specific Information <?> Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [12c] Virtual Channel <?> Capabilities: [148] Device Serial Number 00-e0-4c-68-00-00-00-01 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 00: ec 10 68 81 07 05 10 40 01 00 00 02 10 00 00 00 10: 01 d8 00 00 00 00 00 00 04 f0 af fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 6c 37 30: 00 00 ac fe 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 71 41 00 00 60: 10 84 01 00 63 7e 00 00 00 58 1a 00 11 f4 03 00 70: 40 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11 90: 08 30 00 00 25 4f 0a 00 b5 20 07 00 2a 01 00 00 a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00 b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
03:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:376d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at e800 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 44 30 17 01 10 02 c0 10 00 0c 10 40 00 00 10: 00 f8 bf fe 01 e8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 6d 37 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 20 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 02 e4 00 00 00 00 00 00 00 00 62 14 00 03 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00