Use address mask in probe_jedec. This allows us to have one common probe_jedec function instead of half a dozen wrappers. The trick here is to have FEATURE_ADDR_FULL==0 and thus default to unmasked addresses. That way, we only have to annotate chips which need small address masks.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-probe_jedec_featurebits_addrmask/flash.h =================================================================== --- flashrom-probe_jedec_featurebits_addrmask/flash.h (Revision 836) +++ flashrom-probe_jedec_featurebits_addrmask/flash.h (Arbeitskopie) @@ -149,8 +149,10 @@ */ #define NUM_ERASEFUNCTIONS 5
-#define FEATURE_REGISTERMAP (1 << 0) -#define FEATURE_BYTEWRITES (1 << 1) +#define FEATURE_REGISTERMAP (1 << 0) +#define FEATURE_BYTEWRITES (1 << 1) +#define FEATURE_ADDR_FULL (0 << 2) +#define FEATURE_ADDR_MASK (3 << 2)
struct flashchip { const char *vendor; Index: flashrom-probe_jedec_featurebits_addrmask/jedec.c =================================================================== --- flashrom-probe_jedec_featurebits_addrmask/jedec.c (Revision 836) +++ flashrom-probe_jedec_featurebits_addrmask/jedec.c (Arbeitskopie) @@ -373,6 +373,19 @@ return failed; }
+int getaddrmask(struct flashchip *flash) +{ + switch (flash->feature_bits & FEATURE_ADDR_MASK) { + case FEATURE_ADDR_FULL: + return MASK_FULL; + break; + default: + fprintf(stderr, "%s called with unknown mask\n", __func__); + return 0; + break; + } +} + int write_jedec(struct flashchip *flash, uint8_t *buf) { int i, failed = 0; @@ -438,7 +451,10 @@
int probe_jedec(struct flashchip *flash) { - return probe_jedec_common(flash, MASK_FULL, 1); + int mask; + + mask = getaddrmask(flash); + return probe_jedec_common(flash, mask, 1); }
int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int size)