On Fri, 9 Aug 2013 00:22:05 -0700 Wei Hu wei@aristanetworks.com wrote:
On Thu, Aug 8, 2013 at 11:41 PM, Stefan Tauner stefan.tauner@student.tuwien.ac.at wrote:
- Your patch defaults SPI clock to 16.5 MHz, which didn't work. I
also found none of 22, 33, 100 MHz worked. Only passing -p internal:spispeed="66 MHz" worked.
Please be more specific and/or attach logs. Did the parsing of the value not work or did the actual register changes not work?
Will attach logs tomorrow when I get to work. To make parsing work I had to pass values in quotes like "66 MHz" etc. because you were matching the full name. After figuring this part out the actual register changes failed at msg_perr("Setting SPI clock failed.\n");
I have figured it out... I have used the wrong integer types most of the time, sorry. I have this fixed locally, but want to test it more and review the whole thing before sending another such nightmare :) But I can send you the fix in private if you need it faster than that.
The change that requires to use quotes now was necessary because of the addition of the "800 kHz" value in Yangtze. Eventually we will add a generic frequency parser, but until then please just use the quotes.