Am Donnerstag, den 02.09.2010, 14:54 +0400 schrieb Nikolay Kasatkin:
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200 Host Bridge [1002:5a33] (rev 01) 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
[..]
00:1e.0 ISA bridge [0601]: ALi Corporation PCI to LPC Controller [10b9:1573] (rev 31)
[..] Nice thing is that on this (not yet implemented) chipset we don't seem to need a chipset specific flash enable function, just a board-specific flash enable function for your board. This function interacts with the Winbond Super I/O chip (it clears bit 2 of reg E4 and sets bit 3 of reg F1 in LDN 9, for the tech-savvy people here), and thus we very much appreciate the output of superiotool -deV on your board.
We prefer you to use a recent superiotool version obtained from the subversion repository using
$ svn co svn://coreboot.org/coreboot/trunk/util/superiotool $ cd superiotool $ make $ sudo make install
This will give us enough information to make sense of the bits mentioned above and add support for that mainboard in flashrom.
Regards, Michael Karcher