Hello, I think, I exaggerated things a little bit, due to excitement of my inoperative mother board. The fan of cpu is working. I noticed that the fans are working, in my latter flashing attempts, which I tried later than I e-mailed you. The problem is that it is rotating in a very low constant rpm. I am sorry about that misleading e-mail :( if I am not bothering you, would I continue to share my adventure with you? is the aim of this mailing group, that? Maybe I can fix it with your key guidances...? Thank you again
10 Ocak 2012 02:09 tarihinde Stefan Tauner < stefan.tauner@student.tuwien.ac.at> yazdı:
On Sun, 8 Jan 2012 16:33:54 +0200 İlhan Kahraman ilhan805@gmail.com wrote:
It has not respond anything after that, not even any fan has cycled...
hello İlhan,
your whole story sounds to me a bit like if the hardware has broken coincidentally at the same moment as you wrote to the flash chip. Not starting the fans at power-up is a quite uncommon symptom because normally this is not handled by the host software. if i understood your mails correctly you have re-used the rest of the hardware with the new board and everything works? IMHO the only things that could make the fans not spin are:
- broken power supply and/or connections
- broken mainboard (voltage regulators, traces, capacitors etc)
- shorts by lost screws etc.
- broken/dusted or unconnected fan :)
i guess this wont help you much, but besides the steps you tried already, i dont know anything either, sorry.
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner