Re: [flashrom] FW: Asus A7V8X needs a board enable.

[luc flash]

On Tue, Jul 14, 2009 at 08:18:10AM +0000, Glenn Mueller wrote:
> Yes the sst49lf040B came from the 650i and once i got a good boot out 
> of the chip from the A7V8X i was able to hot flash using dr-dos and 
> the factory program. That is only a working solution if your board 
> boots. Tried enabling with factory chip then swapping to flash it 
> still gave the same error. I am more surprised to see that the 650I 
> booted from the sst49lf040, just for grins i ran the flash program on 
> the 040 to see what it detected it as... a sst49lf080A?

Aha, so you flashed using another program. Can you try flashing the B 
variant using flashrom in your 650i board?

Luc Verhaegen.