Hallo Stefan,
Wir könnten eigentlich deutsch sprechen ;).
Ja, unsere Kunden benützen auch flashrom. Wir haben usere EFI shell flashing tool, aber die Kunden benützen das Linux Shell am liebsten, besonders wenn du viele Clusters/Servers flashen muss.
Stimmt, das SPI interface in « Intel Chipset Serie 6 » ist fast wie die vorausgegangen. Es gibt ME protection und special « unlocking sequence » mit special opcodes.
Aber mein Problem ist vor diesen Sachen. « chipset_flash_enable » findet nicht das PCH: « This chipset supports the following protocols: Non-SPI. WARNING: No chipset found. Flash detection will most likely fail. »
und das PCH device_id (Vendor ID:0x8086, Device ID:0x244e ) existiert nicht in das «chipset_enables » stuct. ( mein PCH heisst Patsburg oder C200 chipset ).
Wenn ich « enable_flash_ich10 » Funktion nötige, es funkioniert auch nicht. Maximum FWH chip size: 0x0 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 tried to set 0xdc to 0x1 on ICH10 failed (WARNING ONLY) Root Complex Register Block address = 0x0 Error accessing ICH RCRB, 0x4000 bytes at 0x00000000 /dev/mem mmap failed: Resource temporarily unavailableIch werde vielleicht eine neue funktion schreiben ;). Vielen Dank.
Mit freundlichen Grüßen Amine Rebai
De : Stefan Tauner stefan.tauner@student.tuwien.ac.at A : Mohammed-Amine.Rebai@bull.net Cc : flashrom@flashrom.org Date : 27/05/2011 20:02 Objet : Re: [flashrom] Intel SandyBridge serie 6 chipsets support
On Fri, 27 May 2011 14:58:57 +0200 Mohammed-Amine.Rebai@bull.net wrote:
Dear Flahsrom representant,
hello!
I am a Bios engineer at BULL, a major european server and supercomputer company «www.bull.com » .
First of all, I would like to thank you for the great job you are doing,
we use your utility a lot.
nice to hear that, thank you. is it offered to your customers too?
I would like to know if you are planning to support the Bios SPI flash flashing on the Intel SandyBridge architecture, especially the Intel 6 series chipset/C200/Patsburg platform controller hub?
the spi interface of the 6 series chipset is very similar to the previous ones and as long as there is no locking in place (i am talking about PR0-PR4 and related "security" stuff) it may already work, have you tried it?
in case of locking in place (that might be a requirement in nowadays chipsets due to the requirement of using the ME) flashrom would not work yet. i am working on this problem within the scope of my google summer of code project which should be completed by the end of summer. dont hold your breath though please ;)