Hi i try to update BIOS on my PL8820 and see this error Extracting image Running install.sh
BIOS upgrade from B272 to B282.
*** IMPORTANT ***
The upgrade will try and power cycle the system the next time a reboot is scheduled. It's highly recommended to reboot the system after the upgrade is done.
Type 'yes' to proceed with BIOS upgrade, or 'no' to abort: yes flashrom v0.9.6.1-r1627 on Linux 3.4.18-pl-xeon-plos_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "Intel ICH10R". Enabling flash write... OK. Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address 0xffe00000 . Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00040030! Expected=0xc3, Found=0xcb, failed byte count from 0x00000000-0x001fffff: 0x1a3 Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! install_firmware: Installation aborted Firmware upgrade failed How to fix it. And more sadly we are power cycle this machine, how to make his alive again. Thanks