./flashrom -V -p internal -r /tmp/flash.out flashrom v0.9.7-r1711 on Linux 3.7.9.lite (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.10, GCC 4.4.7 20120313 (Red Hat 4.4.7-4), little endian Command line (5 args): ./flashrom -V -p internal -r /tmp/flash.out Calibrating delay loop... OS timer resolution is 1 usecs, 1047M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 10001 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "HP" DMI string system-product-name: "ProLiant DL585 G7" DMI string system-version: "Not Specified" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "Rack Mount Chassis" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 03. Please send the output of "flashrom -V" to flashrom@flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found chipset "AMD SB7x0/SB8x0/SB9x0" with PCI ID 1002:439d. Enabling flash write... SPI base address is at 0x0 ROM strap override is not active OK.
Note:
Coreboot superiotool says the superio is a SMSC FDC37C93xFR
Thanks Scott