Some SPI chip drivers and the generic 1-byte SPI chip write functions didn't include the automatic erase present in other chip drivers. Since the majority is definitely auto-erase, change the remaining explicit-erase cases to be auto-erase as well.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-spi_autoerase_before_write/flash.h =================================================================== --- flashrom-spi_autoerase_before_write/flash.h (revision 672) +++ flashrom-spi_autoerase_before_write/flash.h (working copy) @@ -505,7 +505,6 @@ int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int it8716f_spi_chip_write_1(struct flashchip *flash, uint8_t *buf); int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf);
/* sb600spi.c */ Index: flashrom-spi_autoerase_before_write/it87spi.c =================================================================== --- flashrom-spi_autoerase_before_write/it87spi.c (revision 672) +++ flashrom-spi_autoerase_before_write/it87spi.c (working copy) @@ -248,32 +248,6 @@ }
/* - * Program chip using firmware cycle byte programming. (SLOW!) - * This is for chips which can only handle one byte writes - * and for chips where memory mapped programming is impossible due to - * size constraints in IT87* (over 512 kB) - */ -int it8716f_spi_chip_write_1(struct flashchip *flash, uint8_t *buf) -{ - int total_size = 1024 * flash->total_size; - int i; - int result; - - fast_spi = 0; - - spi_disable_blockprotect(); - for (i = 0; i < total_size; i++) { - result = spi_byte_program(i, buf[i]); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(10); - } - /* resume normal ops... */ - OUTB(0x20, it8716f_flashport); - - return 0; -} - -/* * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles * Need to read this big flash using firmware cycles 3 byte at a time. */ @@ -301,8 +275,16 @@ * mapped access. */ if ((programmer == PROGRAMMER_IT87SPI) || (total_size > 512 * 1024)) { - it8716f_spi_chip_write_1(flash, buf); + spi_chip_write_1(flash, buf); } else { + spi_disable_blockprotect(); + /* Erase first */ + printf("Erasing flash before programming... "); + if (flash->erase(flash)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + printf("done.\n"); for (i = 0; i < total_size / 256; i++) { it8716f_spi_page_program(flash, i, buf); } Index: flashrom-spi_autoerase_before_write/spi.c =================================================================== --- flashrom-spi_autoerase_before_write/spi.c (revision 672) +++ flashrom-spi_autoerase_before_write/spi.c (working copy) @@ -963,6 +963,13 @@ int i;
spi_disable_blockprotect(); + /* Erase first */ + printf("Erasing flash before programming... "); + if (flash->erase(flash)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + printf("done.\n"); for (i = 0; i < total_size; i++) { spi_byte_program(i, buf[i]); while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) Index: flashrom-spi_autoerase_before_write/ft2232_spi.c =================================================================== --- flashrom-spi_autoerase_before_write/ft2232_spi.c (revision 672) +++ flashrom-spi_autoerase_before_write/ft2232_spi.c (working copy) @@ -271,6 +271,14 @@ int total_size = 1024 * flash->total_size; int i;
+ spi_disable_blockprotect(); + /* Erase first */ + printf("Erasing flash before programming... "); + if (flash->erase(flash)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + printf("done.\n"); printf_debug("total_size is %d\n", total_size); for (i = 0; i < total_size; i += 256) { int l, r; @@ -281,14 +289,12 @@
if ((r = spi_nbyte_program(i, &buf[i], l))) { fprintf(stderr, "%s: write fail %d\n", __FUNCTION__, r); - // spi_write_disable(); chip does this for us return 1; } while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) /* loop */; } - // spi_write_disable(); chip does this for us
return 0; } Index: flashrom-spi_autoerase_before_write/wbsio_spi.c =================================================================== --- flashrom-spi_autoerase_before_write/wbsio_spi.c (revision 672) +++ flashrom-spi_autoerase_before_write/wbsio_spi.c (working copy) @@ -183,29 +183,17 @@ return 1; }
- read_memmapped(flash, buf, start, len); - return 0; + return read_memmapped(flash, buf, start, len); }
int wbsio_spi_write_1(struct flashchip *flash, uint8_t *buf) { - int pos, size = flash->total_size * 1024; - int result; + int size = flash->total_size * 1024;
- if (flash->total_size > 1024) { + if (size > 1024 * 1024) { fprintf(stderr, "%s: Winbond saved on 4 register bits so max chip size is 1024 KB!\n", __func__); return 1; }
- if (flash->erase(flash)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - for (pos = 0; pos < size; pos++) { - result = spi_byte_program(pos, buf[pos]); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - programmer_delay(10); - } - spi_write_disable(); - return 0; + return spi_chip_write_1(flash, buf); } Index: flashrom-spi_autoerase_before_write/sb600spi.c =================================================================== --- flashrom-spi_autoerase_before_write/sb600spi.c (revision 672) +++ flashrom-spi_autoerase_before_write/sb600spi.c (working copy) @@ -45,12 +45,14 @@ return spi_read_chunked(flash, buf, start, len, 8); }
+/* FIXME: SB600 can write 5 bytes per transaction. */ int sb600_spi_write_1(struct flashchip *flash, uint8_t *buf) { int rc = 0, i; int total_size = flash->total_size * 1024; int result;
+ spi_disable_blockprotect(); /* Erase first */ printf("Erasing flash before programming... "); if (flash->erase(flash)) { @@ -61,7 +63,6 @@
printf("Programming flash"); for (i = 0; i < total_size; i++, buf++) { - spi_disable_blockprotect(); result = spi_byte_program(i, *buf); /* wait program complete. */ if (i % 0x8000 == 0)