Hello Rudolf,
I'm assuming I only need to apply the a.patch you sent (not the imc.patch) to the source for 0.9.6.1. I will test this on an AMD Persimmon board (it won't boot currently, I need a dediProg because I bricked it).
I'll update soon, Cheers, Michel.
-----Original Message----- From: Rudolf Marek [mailto:r.marek@assembler.cz] Sent: Tuesday, March 26, 2013 9:36 AM To: roxfan Cc: frederic.temporelli@bull.net; wmkamp@datakamp.de; flashrom@flashrom.org; Racine, Michel Subject: Re: [flashrom] AMD - SP5100 - take SPI ownership (1/2)
Hi all
I tried with IMC activated on coreboot (Hudson chipset) and it works as expected. Attached patch only tweaks messages and removes now redundant check from sb600 SPI. If IMC is active and firmware handoff fails, then it exits with fatal error.
Signed-off-by: Rudolf Marek r.marek@assembler.cz
It would be nice if someone else could test this (and dont forget to be able to recover from bad flash)
Thanks Rudolf