Hi Andreas,
thanks for your report.
On 16.07.2010 12:45, Andreas Nagel wrote:
andy@donkey:~$ sudo flashrom -V flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "Foxconn" DMI string system-product-name: "nT-330i" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP79", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:0aa2 at 00:03:2 SPI BAR is at 0xfae80000, after clearing low bits BAR is at 0xfae80000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled.
Mh. Odd.
Please send the output of "flashrom -V" to flashrom@flashrom.org to help us finish support for your chipset. Thanks. LPC on this chipset is not supported yet.
Yes indeed. We're working on it, though.
OK. This chipset supports the following protocols: LPC. Calibrating delay loop... 780M loops per second, 100 myus = 196 us. OK. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x7f, id2 0xfc Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x7f, id2 0xfc Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x02, id2 0x00 Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x02, id2 0x00 Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found.
Probing didn't return any meaningful results.
Could you help us out a bit? We have no idea which flash chip is present on that board. Is it possible to get a high-resolution photo of your board (and if so, please don't mail it to this list, but upload it to flickr/imageshack/...)? Could you give us a link where we can download a BIOS update for this board? That would help us reverse engineer support for the ION chipset.
Regards, Carl-Daniel