Hi all:
The behaviour of option --image has changed between versions 0.9.9 and 1.0.0.
In the past, I wasn't specifying any --image, and flashrom just flashed the one and only that I had defined in my layout file.
Now, flashrom just states that the chip content is identical, which is not the case. This is the output:
--------8<--------8<--------8<-------- flashrom v1.0 on Windows 6.1 (x86) flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK. Found Macronix flash chip "MX25L6406E/MX25L6408E" (8192 kB, SPI) on ft2232_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Warning: Chip content is identical to the requested image. Erase/write done. --------8<--------8<--------8<--------
That is misleading. If the newer flashrom does not default to any image (or maybe to all images?), and the user specifies a layout file but not --image arguments, it should then fail with "no layout image specified" or a similar error message.
Best regards, rdiez