On Fri, 2 Sep 2011 20:05:13 +0200 Raúl Sigüenza raulsiguenza89@gmail.com wrote:
Board: http://www.asrock.com/mb/overview.asp?Model=p4v88
root@desktop:/home/raul# flashrom -Vr bios.bin flashrom v0.9.3-r1323 on Linux 2.6.38-11-generic (i686), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1981M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1030 us, 10000 myus = 11307 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: "P4V88" DMI string system-version: "1.00" DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "P4V88" DMI string baseboard-version: "1.0" DMI string chassis-type: "" Found chipset "VIA VT8237", enabling flash write... chipset PCI ID is 1106:3227, OK. This chipset supports the following protocols: Non-SP. […] Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xb6 Found chip "SST SST39SF020A" (256 kB, Parallel) at physical address 0xfffc0000. […] === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Restoring PCI config space for 00:11:0 reg 0x59 Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41
hi
what is the purpose of your mail exactly? :) have you tried writing the flash chip? because that's the only thing that would be helpful to us... if you are not sure if your board is supported... we don't know! you have to try it please :)