[flashrom] [commit] r941 - trunk

[repository service]

Author: snelson
Date: Tue Mar 16 01:51:31 2010
New Revision: 941
URL: http://flashrom.org/trac/coreboot/changeset/941

Log:
remove some copied functions (from 82802ab.c) and use the 82802ab equivalents
fix missing prototypes to _82802ab functions
Signed-off-by: Sean Nelson 
Acked-by: Carl-Daniel Hailfinger

Modified:
   trunk/chipdrivers.h
   trunk/sharplhf00l04.c

Modified: trunk/chipdrivers.h
==============================================================================
--- trunk/chipdrivers.h	Tue Mar 16 01:45:00 2010	(r940)
+++ trunk/chipdrivers.h	Tue Mar 16 01:51:31 2010	(r941)
@@ -59,6 +59,8 @@
 int erase_82802ab(struct flashchip *flash);
 int erase_82802ab_block(struct flashchip *flash, unsigned int page, unsigned int pagesize);
 int write_82802ab(struct flashchip *flash, uint8_t *buf);
+void print_82802ab_status(uint8_t status);
+void write_page_82802ab(chipaddr bios, uint8_t *src, chipaddr dst, int page_size);

/* jedec.c */
 uint8_t oddparity(uint8_t val);

Modified: trunk/sharplhf00l04.c
==============================================================================
--- trunk/sharplhf00l04.c	Tue Mar 16 01:45:00 2010	(r940)
+++ trunk/sharplhf00l04.c	Tue Mar 16 01:51:31 2010	(r941)
@@ -22,18 +22,6 @@
 #include "flash.h"
 #include "chipdrivers.h"

-// I need that Berkeley bit-map printer
-void print_lhf00l04_status(uint8_t status)
-{
-	printf("%s", status & 0x80 ? "Ready:" : "Busy:");
-	printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:");
-	printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:");
-	printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:");
-	printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:");
-	printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:");
-	printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:");
-}
-
 /* FIXME: The datasheet is unclear whether we should use toggle_ready_jedec
  * or wait_82802ab.
  */
@@ -48,7 +36,7 @@
    chip_writeb(0x50, bios);
    printf("Erase at 0x%lx\n", bios);
    status = wait_82802ab(flash->virtual_memory);
-	print_lhf00l04_status(status);
+	print_82802ab_status(status);
    // clear write protect
    printf("write protect is at 0x%lx\n", (wrprotect));
    printf("write protect is 0x%x\n", chip_readb(wrprotect));
@@ -61,7 +49,7 @@
    programmer_delay(10);
    // now let's see what the register is
    status = wait_82802ab(flash->virtual_memory);
-	print_lhf00l04_status(status);
+	print_82802ab_status(status);
    printf("DONE BLOCK 0x%x\n", blockaddr);

if (check_erased_range(flash, blockaddr, blocklen)) {
@@ -71,19 +59,6 @@
    return 0;
 }

-void write_page_lhf00l04(chipaddr bios, uint8_t *src,
-			 chipaddr dst, int page_size)
-{
-	int i;
-
-	for (i = 0; i < page_size; i++) {
-		/* transfer data from source to destination */
-		chip_writeb(0x40, dst);
-		chip_writeb(*src++, dst++);
-		wait_82802ab(bios);
-	}
-}
-
 int write_lhf00l04(struct flashchip *flash, uint8_t *buf)
 {
    int i;
@@ -98,7 +73,7 @@
    printf("Programming page: ");
    for (i = 0; i < total_size / page_size; i++) {
    	printf("%04d at address: 0x%08x", i, i * page_size);
-		write_page_lhf00l04(bios, buf + i * page_size,
+		write_page_82802ab(bios, buf + i * page_size,
    			    bios + i * page_size, page_size);
    	printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
    }