On Wed, Sep 2, 2009 at 10:08 PM, Stefan Reinauerstepan@coresystems.de wrote:
On 02.09.2009, at 21:05, Davíð Þór Þórarinsson david.thor@gmail.com wrote:
Hello Carl-Daniel!
Sorry for not getting to this sooner. I never got your e-mail yesterday because of the Gmail crash and I just got back home from work. See my answers below.
On Tue, Sep 1, 2009 at 9:43 PM, Carl-Daniel Hailfingerc-d.hailfinger.devel.2006@gmx.net wrote:
Hi Davíð,
On 01.09.2009 20:39, Davíð Þór Þórarinsson wrote:
Some interesting facts: The chipset in this product is not on your list of supported chipsets, nor is the motherboard found on your list of supported motherboards. the chipset according to the manual is North Bridge: AMD770, South Bridge: AMD SB710.
We list everything in the SB700 family (SB700/SB710/SB750) as SB700. I have sent a patch to fix this and we'll commit it soon.
And it worked like a charm!
Glad to hear. We'll add your board to the list of working boards. It would be nice if you could reply-all to this mail with the output from lspci -nnvvvxxx
The lspci output is found at the end of the mail (below)
During the flash update, both the motherboard and chipset were wrongly identified. Here is the output from the operation:
flashrom v0.9.0-r631 No coreboot table found Found Chipset "AMD SB700", enabling flash write... OK Found board "GIGABYTE GA-MA78GM-S2H", enabling flash write... FAILED!
Hmmm. The Gigabyte board mismatch problem... we can't fix the problem due to nonstandard PCI settings on these boards, but we can hide it.
Would you mind downloading and compiling the latest flashrom version? You can get it either from our subversion repository at svn://coreboot.org/flashrom/trunk or a current snapshot from http://qa.coreboot.org/snapshots/ The output of latest flashrom -V would be appreciated as well so I can check the effect of some recent changes on your board.
Sure thing. I downloaded the 0.9.1-r709 version from the snapshots but I am unable to get it to compile properly. Any idea what it could be? Here is the output:
davidt@newthor:/tmp/flashrom-0.9.1-r709$ make Checking for a C compiler... found. Checking for pciutils and zlib... found. Checking for FTDI support... not found. cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o chipset_enable.o -c chipset_enable.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o board_enable.o -c board_enable.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o udelay.o -c udelay.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o jedec.o -c jedec.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o stm50flw0x0x.o -c stm50flw0x0x.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst28sf040.o -c sst28sf040.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o am29f040b.o -c am29f040b.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o mx29f002.o -c mx29f002.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o m29f400bt.o -c m29f400bt.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o pm29f002.o -c pm29f002.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o w49f002u.o -c w49f002u.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o 82802ab.o -c 82802ab.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o pm49fl00x.o -c pm49fl00x.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lf040.o -c sst49lf040.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o en29f002a.o -c en29f002a.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lfxxxc.o -c sst49lfxxxc.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst_fwhub.o -c sst_fwhub.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o layout.o -c layout.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o cbtable.o -c cbtable.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o flashchips.o -c flashchips.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o physmap.o -c physmap.c cc1: warnings being treated as errors physmap.c: In function ‘rdmsr’: physmap.c:146: error: dereferencing type-punned pointer will break strict-aliasing rules make: *** [physmap.o] Error 1
What's your compiler version? Adding -fno-strict-aliasing to your CFLAGS should temporarily fix the issue.
Stefan
It sure did.
# gcc -v Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.4.1-3ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --program-suffix=-4.4 --enable-nls --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-objc-gc --disable-werror --with-arch-32=i486 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.4.1 (Ubuntu 4.4.1-3ubuntu3)
The flashrom -V output is below. Let me know once again if there is anything more that I can do to help. And thanks yet again for this great utility!
/David
root@newthor:/usr/local/sbin# ./flashrom -V flashrom v0.9.1-r709 No coreboot table found. Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=1, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Disabling flash write protection for board "GIGABYTE GA-MA78GM-S2H"... FAILED! Calibrating delay loop... 894M loops per second, 100 myus = 175 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40P, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=4
The FIFO pointer after skipping is 0. [c2][20][14][c2] RDID returned 0xc2 0x20 0x14 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25D16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x00, id2 0xe0 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x24, id2 0x41 Probing for Macronix MX25L512, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 sb600_spi_send_command, cmd=5, writecnt=0, readcnt=2
The FIFO pointer after skipping is 0. [00][00] Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x24, id2 0x41 Probing for Spansion S25FL016A, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF016B, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: sb600_spi_send_command, cmd=90, writecnt=3, readcnt=2 [0] [0] [0] [ 0][ 0][ 0]The FIFO pointer after skipping is 3. [c2][13] REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: sb600_spi_send_command, cmd=90, writecnt=3, readcnt=2 [0] [0] [0] [ 0][ 0][ 0]The FIFO pointer after skipping is 3. [c2][13] REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x75, id2 0x10, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x00, id2 0xe0 Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x24, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x24, id2 0x41 Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0x24, id2 0x41 Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x24, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0x24, id2 0x41 Probing for ST M25P05-A, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. Probing for ST M25P10-A, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. Probing for ST M25P20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. Probing for ST M25P80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x00, id2 0xe0 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x00, id2 0xe0 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0x24, id2 0x41 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0x24, id2 0x41 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0x24, id2 0x41 Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x00, id2 0xe0 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x24, id2 0x41 Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0x24, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x20, 256 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x40, 512 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x80, 1024 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x16, 2048 KB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0x00, id2 0xe0, id1 parity violation Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x00, id2 0xe0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x24, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0x24, id2 0x41 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0x0, id2 0xe0 Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x100000000. sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=3
The FIFO pointer after skipping is 0. [c2][20][14] RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) No operations were specified.
Best regards,
/David
lspci output:
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00: 02 10 57 59 06 00 30 22 00 00 00 06 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 57 59 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 78 59 07 04 10 00 00 00 04 06 01 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 e1 e1 00 00 20: 00 fa f0 fc 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00
00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 7f 59 07 04 10 00 00 00 04 06 01 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 d1 d1 00 00 20: c0 fd c0 fd f1 fd f1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00: 02 10 91 43 07 00 30 02 00 01 06 01 00 20 00 00 10: 01 ff 00 00 01 fe 00 00 01 fd 00 00 01 fc 00 00 20: 01 fb 00 00 00 f0 02 fe 00 00 00 00 58 14 02 b0 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00 10: 00 d0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00 10: 00 c0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00 10: 00 b0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00 10: 00 a0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00 10: 00 90 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 c0 00 00 00 00 00 00 00 03 02 00 00
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied> Kernel modules: i2c-piix4 00: 02 10 85 43 03 04 30 02 3c 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 85 43 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00: 02 10 9c 43 05 00 30 02 00 8a 01 01 00 20 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fa 00 00 00 00 00 00 00 00 00 00 58 14 02 50 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 01 00 00
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Giga-byte Technology Device [1458:a022] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 02 10 83 43 06 00 10 04 00 00 03 04 01 20 00 00 10: 04 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 a0 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 00 00 00
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 00: 02 10 9d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 9d 43 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 c0 c0 80 22 20: e0 fd e0 fd d0 fd d0 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 99 43 06 00 a0 02 00 10 03 0c 01 20 00 00 10: 00 80 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: amd64_edac_mod 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: nVidia Corporation G73 [GeForce 7600 GT] [10de:0391] (rev a1) Subsystem: Giga-byte Technology Device [1458:3417] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at ef00 [size=128] [virtual] Expansion ROM at fc000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 fb 20: 00 00 00 00 01 ef 00 00 00 00 00 00 58 14 17 34 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fdf00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 00: ec 10 68 81 07 04 10 00 02 00 00 02 10 00 00 00 10: 01 de 00 00 00 00 00 00 0c f0 ff fd 00 00 00 00 20: 0c 00 fe fd 00 00 00 00 00 00 00 00 58 14 00 e0 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
03:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fddff000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: bttv Kernel modules: bttv 00: 9e 10 6e 03 06 00 90 02 11 00 00 04 00 20 80 00 10: 08 f0 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 10 28
03:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fddfe000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: Bt87x Kernel modules: snd-bt87x 00: 9e 10 78 08 06 00 90 02 11 00 80 04 00 20 80 00 10: 08 e0 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 04 ff
03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 00: 4c 10 24 80 06 00 10 02 00 10 00 0c 01 20 00 00 10: 00 f0 ef fd 00 80 ef fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom